Upgrade your Konftel 800 to the latest version. This will upgrade the software in the smart microphones connected to the unit.


If you are using a version previous to 1.0.4 you can follow this guide how to upgrade.

  1. Take the microphone out of the Konftel 800.
  2. Press and hold the mute button on the Smart Mic.
  3. Put the cable in again and keep pressing the mute button.
  4. Wait for 6-8 seconds until the led on the Smart Mic changes color, now you can release the mute button.
  5. Wait for the upgrade to finish, the leds will flash while upgrading.
  6. The leds should turn off and the unit is then back in idle mode again.
  7. On the Konftel 800 you can now check the Smart Mic version under Settings.
  8. You should also no longer get the message about Smart Mic update.